Samar da tan 1 na taliyar shinkafa mai ɗanɗano yana cinye tan 3 na ruwa da kuma wutar lantarki 240 kWh — shin da gaske kun ƙididdige ainihin kuɗin da ake kashewa wajen samarwa?

Kalubalen shawo kan inganci a fannin samar da taliyar shinkafa mai jika ya daɗe yana damun masana'antar:

• Rashin daidaiton haɗa shinkafa da hannu yana haifar da rashin daidaito tsakanin nau'ikan.
• Rashin isasshen gelatinization yana sa taliyar ta karye cikin sauƙi.
• Bayan an fitar da taliyar, taliyar ta manne tare kuma ba za a iya raba ta yadda ya kamata ba.
• Rashin cikawa wajen tsaftace jiki yana rage tsawon lokacin da za a ajiye.

Waɗannan "ƙananan matsaloli" a ƙarshe suna haifar dababban ƙimar lahani, dawowa, da asarar abokin ciniki.

• Jimlar fitarwa ta isa900–1000 kg/sa'adontaliyar shinkafa mai jika sabo.
• Na'urar fitar da taliyar shinkafa samfurin 400 tana samar da ingantaccen fitarwa na350–400 kg/sa'adon busasshen taliyar shinkafa/danye.
• Yana nunaGelatinization na ganga biyu + fitar da ganga ɗayaTare da tsarin dandamali, gangunan da sukurori suna da sauƙin wargazawa da tsaftacewa, wanda ke ba da damar sauya kayayyaki cikin sauri.

• Yawan amfani da ruwa kusan shineTan 3 a kowace tan na taliyar shinkafa(banda amfani da ruwan kettle na tsaftacewa), yayin da amfani da wutar lantarki kawai ake yi230–240 kWh- ƙasa da matsakaicin masana'antu sosai.
• Tsarin allurar mai wayo tare da sarrafa PLC yana sarrafa hanyoyin wanke shinkafa, jiƙa, niƙa, da haɗa su daidai, yana tabbatar da daidaiton ma'auni da daidaiton abun ciki na danshi.

• Zafin jiki, zafi, saurin aiki, da lokacin sarrafawa a cikin ɗakin gelatinization sunecikakken sarrafa kansatare da saitunan sigogi na dannawa ɗaya.
• Fasaha mai hana zagayawar tururi mai lasisi tare da motsin iska mai zafi yana tabbatar da daidaiton yanayin zafi da danshi, yana kiyayeYawan gelatinization na ≥90%da kuma ingantaccen tsarin kula da danshi na samfurin da aka gama aKashi 60–70%.

• Tsarin fesawa, yankewa, da rataye foda yana amfaniDaidaita saurin haɗin PLCdon hana mannewa.
• Injin ƙwanƙwasawa da sassautawa ta atomatik yana nutsar da taliyar a cikin ruwa gaba ɗaya don biyan buƙatun kumburi, yana magance matsalarKashi 99% na matsalolin mannewa na taliya.
• Tsarin maganin tsaftace jiki kafin a yi amfani da shi wajen cire ragowar sitaci a saman, yana sa taliyar ta yi laushi kuma ba ta mannewa.

• Tun daga ciyar da shinkafa zuwa marufi na gama gari, dukAna sarrafa ayyuka 19 ta atomatik ba tare da wata matsala baMasu aiki za su iya sarrafa dukkan layin samarwa ta hanyar allon sa ido na tsakiya.
• Yana tallafawa hanyoyin sarrafawa da yawa, gami daan yi yayyafi/ba a yi yayyafi bakumatsufa/rashin tsufahanyoyin samarwa, yayin da ake tabbatar da cewa taliyar shinkafa mai ruwa-ruwa mai inganci mai kyau.
• Ya dace da duka biyunsabbin masana'antun samar da taliyar shinkafa da aka ginakumahaɓakawa masu hankali na layukan samarwa na yanzu.